Some Useful Tips For Successful Canon Printer Setup And Installation

 

Canon printers are the users’ choice these days because of their user-friendly features. The Canon printers are easy to set up as well because of canon ij setup guidelines available on www.canon.com/ijsetup. You can easily set up your Canon printer by visiting canon.com/ijsetup as it has a detailed setup guide. From basic hardware setup to technical software setup, you will find everything on canon.com/ijsetup. Just be very careful with the hardware setup and follow the steps carefully. This blog contains a detailed step-by-step guide for Canon printers.

                                      

Guide For Hardware And Software Setup Of The Canon Printer:

Below are the step-by-step guidelines for the setup. Before starting ensure you have A4 sized paper sheets to test the printer and a printer cable in case you wish to do the wired connection to the wifi. An active internet connection line is a prerequisite for this setup. Now, let’s begin;

1. Ready The Canon Printer-

Unbox the Canon printer and remove all the plastic packaging from the printer. Then start taking off all the protective tapes from the printer. Make sure there are no protective tapes left inside of the printer. Refer to the manual to know where tapes are actually placed. Then plug the printer into the electrical socket. Put paper in the paper tray. Switch on the printer finally.

 

2. Ink Cartridge And Language Setup-

Put the ink cartridges inside the printer in their place. Then, place A4 sized sheets in the input tray and your printer is now ready for use. Switch on the printer and follow the prompts. Initially select the language you prefer. 

 

3. Grid And Alignment Of The Scanner-

You need to print a test page to check the grids. The printer will determine where the grids actually print. View the print quality, if it is not satisfactory rest the grid by going to the settings. Next, align the scanner by placing PCB on it. Run the scan task finally.

 

4. Software Installation-

After you have connected the printer to the system successfully. Then, you need your computer to control and give print commands to the printer. For this, you have to install the printer driver software on your computer. Visit the canon.com/ijsetup website to install the software. Enter the printer model number and look for the printer. Click on your printer when you see it. Choose the printer under its range list i.e. PIXMA, iSENSYS, or MAXIFY. Select the range and correct model. Then choose the operating system on which you want your printer drivers to be installed. After selecting that, click on the download button. 

 

5. Launch The Software-

After the completion of software downlaod, open the file and start following the instructions. Next, we will discuss how to connect the printer via wired or wireless connection. The software installation process might take a few moments. 

 

6. Connecting The Printer To Wifi-

In case of a wireless connection;

Firstly, from your printer visit the settings menu and then click on the device settings. Then choose the Wireless LAN settings to proceed. Choose the default settings or setup without the wire. Choose the network name or SSID next. Then, type in the password for your wifi network. Press OK to confirm.

 

In case of a wired connection;

If you wish to connect the printer to wifi via ethernet cord, select this in the settings, otherwise the setup is the same. 

 

 

Canon Installed!

 

Canon IJ setup is quite easy and quick when you follow the guidelines properly. Be very careful with the hardware setup, no part should be damaged while unboxing and removing the protective tapes. Visit www.canon.com/ijsetup for detailed setup and to see video tutorials for the setup. Canon.com/ijsetup is the official site and provides genuine guidelines without involving any excess matter. Setup your Canon and you are all set to enjoy the printing experience.