Manual Setup For Canon Pixma TS3322

 

Canon TS3322 printer is an all-rounder, wireless printer. It is specially designed to have ease of use. It utilizes only 2 fine cartridges. Do you wish to set up your Canon IJ TS3322 printer and need help with the setup? Visit ij.start.canon/ts3322 setup for the perfect setup guide for your Canon IJ TS3322 printer setup. Ij.start.canon ts3322 setup guides you through videos to do the printer setup. Follow the blog to set up your Canon TS3322 printer.




Steps To Set Up And Connect Canon TS3322 Printer To The Wireless Connection:-


If you are a new Canon user and need help in setting up your Canon printer, then follow the easy and quick guide written below to set up your Canon Pixma TS3322 printer;


  1. Initially, unbox your Canon TS3322 printer and assemble all the contents in one place. Get rid of any packaging.

  2. Get power cord, ink cartridges, and CD-ROM everything in one place.

  3. Now, plug your printer into a properly functioning electrical socket.

  4. After that, switch on your printer by long-pressing the power on/off button.

  5. After that open the ink cartridge area and wait for some time to let the ink cartridge come in the center.

  6. Now, unpack the ink cartridge and then get rid of all the packaging material.

  7. Once you have carefully installed the ink cartridges, close them.

  8. The next step is to open the paper support and place the sheets towards the left corner of the printer.

  9. After that take a plain sheet and put that in the feed slot.

  10. Now, with the use of the paper guide, adjust the loading paper by sliding it to the right side of the printer.

  11. Next, you have to take out the output tray extension and ready the printer for installation of the printer driver software.

  12. Now, we will proceed with the wifi connection. If you want to connect your printer to the wifi connection, then click on the wifi icon and enable it to connect it to the wireless connection.

  13. Now you have to check the CD that you received along with the printer. That CD contains the printer driver software, so put the CD in the CD Drive and then run it to install the driver software to your system.

  14. In case your computer or laptop doesn’t have the CD drive or if you use your HP printer with your mobile phone, then you must install the Canon printer drivers from its official website.

  15. On the web page of the printer driver software website, enter your Canon printer’s model name and number.

  16. You will see the printer driver software compatible with your printer model and operating system.

  17. Now, click on the download tab and download the driver software file to your system. Now run the driver file to install the printer drivers to your system.

  18. That’s it! Printer drivers are installed on your PC device and it is ready to give commands.

Canon Pixma TS3322 Ready To Use!

Canon IJ TS3322 setup is complete after you follow every bit of the guide mentioned above. ij.startcanon/ts3322 setup is your ultimate destination if you are looking for a perfect solution to set up your Canon printer. You can also download the printer drivers compatible with your Canon IJ TS3322 printer model from ij.start.canon ts3322 setup website.

Comments

Popular posts from this blog

Detailed Instructions For Canon TS3122 Wireless Setup Free Download For Windows

Simple Steps to Print on Canon IJ Printer Setup

Easy Guiding Steps for ij Start Canon Setup TR4500