Steps to Uninstall the Software and Drivers to fix the issue in Canon TS3122 wireless setup

 

If you have bought a Canon TS3122 printer then, we know you might be looking for the right solution to do the wireless setup of the printer. In this blog, we will explain how to perform the Canon Pixma TS3122 Setup. Ij.start.canon is the official website for Canon printer setup. So visit ij.start.canon TS3122. So now, just log onto ij start canon, setup TS3122, and start printing effortlessly. This article covers the wireless setup of the Canon TS3122 printer by two methods and how to uninstall the printer driver software in case you have an issue with the wireless setup.

Steps To Do The Canon TS3122 Printer Wireless Setup Using Easy Wireless Connect Option:

In case your wireless network router does not have a WPS button then, you have to use this method to connect the printer to the wireless network at your home. It is called the easy wireless connect method or the Direct method. Follow the steps below to connect your printer wirelessly to the network using the Direct method;

1. The first and foremost step is to switch on your Canon TS3122 printer.
2. Next, if you see the green LED light blinking, then hit the stop button on the printer.
3. Once, the LED light is solid, press+hold the direct button on your Canon printer’s digital panel for almost 2-3 seconds.
4. A wireless icon starts flickering on your printer’s digital screen.
5. After that, start your computer system that has the Windows 10 operating system and download the printer drivers compatible with your Canon TS3122 printer from Canon's official website.
6. Now, after the download is complete, run the printer driver software on your system.
7. Click on the Start Setup tab to start the process.
8. The installation of drivers might take a few moments, so wait patiently for the installation to complete.
9. Now, proceed by selecting your region and hit the next button.
10. The next settings prompt will ask for the firewall settings.
11. After that choose the Deactivate the block option to proceed.
12. A check connection status screen will appear in front of you. Here, you will observe your printer and wireless network’s name. Select yes on that.
13. After that, type in your wifi password and click on the Next tab to proceed.
14. That’s it your Canon TS3122 printer will be installed on your computer system along with the wifi settings.
15. At the final step, a prompt will ask for the Page Alignment.
16. After the alignment is complete, you can start printing wirelessly from your Canon TS3122 printer.

Steps To Do The Canon TS3122 Printer Wireless Setup Using The WPS Button Option:

So, if your wifi network router has a WPS button present on it, then you can use this WPS connection method to do the wireless setup of your Canon TS3122 printer. Follow the steps below to connect your Canon TS3122 printer to the wireless network through WPS Button option;

1. The first four steps remain the same as in the Easy Wireless connection method.
2. Now, look for the WPS button on the wifi router.
3. You must press + hold the WPS button present on the router for 3-5 seconds approximately.
4. After that the WPS LED light will start flashing on the wifi router.
5. The connection of the Canon TS3122 printer to the wifi network will only take 2 minutes.
6. You will observe the wireless icon signal indicators on the printer’s screen once the connection is established successfully.
7. Know that the connection has not been established, if you do not see the signal indicators.
8. After that, open your computer with Windows 10 and download the compatible printer drivers.
9. Run the downloaded drivers file on your system and tap on the “start setup’ option to start installing the software on your system.
10. The installation of the setup might take a few moments, wait patiently for the setup to complete.
11. Now, proceed by, selecting your region and click on next to move further.
12. The next step will ask for you to make the firewall settings, here you have to select the deactivate the block option.
13. The next page will ask you to check your connection status, choose your printer name and wifi name and hit the yes tab to continue.
14. Finally, do the page alignment and once it's complete you can start printing on your Canon TS3122 printer.

After the drivers have been installed, if there is an issue with the wireless setup or if the printer is not working as expected then, there is a possibility that you have downloaded either an incompatible driver software or an outdated version of the software. So we recommend you to uninstall the printer driver software and install a new one to start printing.

Steps To Uninstall The Printer Driver Software:

1. Firstly, launch the start menu on your computer.
2. Then, open the control panel menu from there.
3. Choose to uninstall an application icon.
4. You will see a list of installed and running applications on your Windows 10 computer system.
5. Look for the canon PIXMA TS3122 printer and right click on it and choose the uninstall option.
6. Finally, the printer drivers software will be uninstalled.
7. Now, you have to navigate to the Canon printer’s official website to download the original and updated printer drivers from there.

Concluding!

IJ Start Canon is the official website for setup instructions of the Canon printers. Visit ij.start.canon TS3122 printer wireless setup guidelines. The Canon PIXMA TS3122 setup is very easy and can be done in two ways. The steps might seem long but they are actually easy. The ij start canon setup TS3122 needs to be done carefully so that you don't make any error while performing any step.